Battery powered hydraulic cable cutter for Cu/Al Cable and armoured cable BZ-65C manufacturer from China NINGBO MARSHINE POWER TECHNOLOGY CO., LTD.

Product Detail

Model No.: BZ-65C

Production Capacity: 1000sets/Week

Delivery Date: 30days

Crimping range:: 65mm

Rated pressure:: 63Mpa

Max pressure:: 70MPA

Hydraulic oil:: Shell Tellus T15

Means of Transport: Ocean,Land,Air

Packing: Industrial packing

Brand Name: MARSHINE

Rated output:: 60KN

Oil capacity:: 115ML

Working temperature:: -10-40℃

Retraction mode:: Spring retraction( use with...

This Cutting Tool commonly used in electric power ,chemical industry,steel, machinery ,industry and so on.

BZ-65C/85C/105C Battery cable cutter

Cutting range dia 65/85/105mm
Output 60/60/120KN

Cable Cu/Al cable, armoured Cu/Al cable

Hydraulic oil SHELL TELLUS T15

Data Sheet

Technical data:
Item No:	BZ-65C	BZ-85C	BZ-105C
Crimping range:	Φ 65mm	Φ 85mm	Φ 105mm
Rated output:	60KN	60KN	120KN
Rated pressure:	63Mpa	63Mpa	66Mpa
Oil capacity:	115ml	115ml	170ml
Max pressure:	70Mpa
Cable:	Cu/Al cable, armoured Cu/Al cable
Battery:	DC 18V 3.0Ah Li-ion battery
Charging voltage:	AC 100V-240V, 50-60Hz
Charging time:	2hours
Retraction mode:	Spring retraction( use with single action pump)
Hydraulic oil:	Shell Tellus T15
Working temperature:	-10-40℃

FEATURE:

Micro computer control systerm-automatically detectes the pressure when in crimping with double safety protect

* The tool is equipped with a double piston pump which characterized with a fast approach towards the connecting material and

transfer to high pressure automatically by slow crimping

* If a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red

display flashes.

* One key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means

piston return to the original position

* A temperature sensor makes the total stop working automatically whenthe temperature is over 60℃ under long time working, the

fault signal sounds, it means the tool can't continue to work until temperature reduced to the normal